Daewoo DWM-8010 Service Manual page 10

R eplacing Motor For Spin And Wash
1. Remove 2 screws on the cover B.
3. Remove bolt and nut on the upper side of the drum
coupling as and lift up the basket spin.
5. Remove bolt connecting motor pulley and pulsator
pulley.
7. Remove 3 screws on the base and Remove wash
motor.
2. Separae harness as connectors.
4. Remove 1 screw fixing cabinet.
6. Remove panel front and 3 screws on flange of the
tub. And lift up the tub assembly.
8. Remove 3 screws and spin motor.
CONNECTION 10