Tone Adjustment (Bass/Treble); Balance Adjustment; Fader Adjustment; Loudness Function - Fiat Panda Owner's Handbook Manual

❒ LOUDNESS (LOUDNESS function
activation/deactivation);
❒ EQUALISER (activation and selection of factory-
set equaliser levels);
❒ USER EQUALISER (customised equaliser setting).

TONE ADJUSTMENT (bass/treble)

Proceed as follows:
❒ Use
or buttons to set the "Bass" or "Treble"
in the AUDIO menu;
❒ press the
or
bass or treble.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.

BALANCE ADJUSTMENT

Proceed as follows:
❒ Select the "Balance" setting in the AUDIO menu
using the or
❒ press the
button to increase the volume of the
right speakers or the
volume of the left speakers.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.
Select the value " 0
the right and left audio outputs.
250
button to increase/decrease the
button;
button to increase the
" to set the same level for

FADER ADJUSTMENT

Proceed as follows:
❒ Select the "Fader" setting in the AUDIO menu
using the or button;
❒ press the
button to increase the sound from the
rear speakers or the
sound from the front speakers.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.
Select the value " 0 " to set the same level for
the front and rear audio outputs.

LOUDNESS FUNCTION

The Loudness function improves the volume of the
sound whilst listening at low volumes, increasing the
bass and treble.
To activate/deactivate the function, select the
Loudness setting of the AUDIO menu using the
buttons.
The condition of the function (on or off) is shown on
the display for a few seconds by the wording
"Loudness On" or "Loudness Off".
button to increase the
or