Menu; Af Switching Function - Fiat Panda Owner's Handbook Manual

MENU

Menu button functions
Press the Menu function briefly to activate the
MENU function. The display will show the first menu
item that can be adjusted (AF) ("AF Switching On" on
the display).
Use the or
functions. To change the setting of the function
selected use the
The current status of the function selected will be
shown on the display.
The functions managed by the Menu are:
❒ AF SWITCHING (ON/OFF);
❒ TRAFFIC INFORMATION (ON/OFF);
❒ REGIONAL MODE regional programmes
(ON/OFF);
❒ MP3 DISPLAY (CD MP3 display settings);
❒ SPEED VOLUME (speed-dependent automatic
volume control);
❒ RADIO ON VOLUME (maximum radio volume
limit activation/deactivation);
❒ SPEECH VOLUME (telephone volume setting);
❒ AUX OFFSET (alignment of the portable device
volume to that of the other sources);
❒ RADIO OFF (switching-off mode);
❒ SYSTEM RESET Press the Menu button again to
exit the Menu function.
252
buttons to scroll through the menu
or buttons.
Note
The AF SWITCHING, TRAFFIC INFORMATION and
REGIONAL MODE adjustments are only possible in
FM mode.

AF SWITCHING function

(alternative frequency search)
The radio can operate in two different modes in the
RDS system:
❒ "AF Switching On": search for alternative
frequencies active (the letters "AF" appear on the
display);
❒ "AF Switching Off": search for alternative
frequencies not active.
Proceed as follows to activate/deactivate the
function:
❒ press the MENU button and select "AF Switching
On";
❒ press the
or buttons to activate/deactivate the
function.
With the function activated, the radio automatically
tunes into the station with the strongest signal
broadcasting the same programme. While driving, the
same station can be continuously listened to without
having to change the frequency when you change
zones.
Obviously, it must be possible to receive the station
that you are listening to in the area you are driving
through.