Fiat Panda Owner's Handbook Manual page 51

WARNING
The daytime running lights are an
alternative to the dipped beam
headlights for driving during the daytime in
countries where it is compulsory to have lights
on during the day, and they are also permitted
in those countries where this not obligatory.
WARNING
Daytime running lights cannot replace
dipped beam headlights when driving at
night or through tunnels.The use of daytime
running lights is governed by the highway code
of the country in which you are driving. Comply
with legal requirements.
SIDE LIGHTS AND DIPPED BEAM
HEADLIGHTS
With the ignition key turned to MAR, turn the ring
nut A fig. 31 to . If dipped beams are activated,
the daytime running lights go out and the side lights
and dipped headlights come on. The
light will come on in the instrument panel.
When the ignition key is turned to STOP or
removed and the ring nut is turned from O to
the side lights and number plate lights switch on.
The warning light will come on in the
instrument panel.
PARKING LIGHTS
These lights can only be turned on with ignition key
in STOP position or removed, by moving the ring nut
A first to position O and then to position
The warning light switches on on the instrument
panel.
MAIN BEAM HEADLIGHTS
To activate the main beam headlights, with ring nut at
, pull the stalk towards the steering wheel. The
warning light switches on in the instrument panel.
When the stalk is pulled towards the steering wheel
again, the lights deactivate, the dipped headlights
reactivate and the warning light switches off.
GETTING TO
KNOW YOUR CAR
warning
SAFETY
, all
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
.
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
47