40 Hours
1.
Check gearbox oil level.
- add as required.
2. Add approximately 10 squirts of grease in chain case.
Annually
1.
Change gear box oil. Refill with SAE 85W90 gear oil.
2. Wash machine.
A-frame Adjustment
When moving the hitch along the front frame to adjust the offset, follow this procedure.
1.
Clear the area of bystanders, especially small children.
2. Raise the machine so it is slightly out of the ground.
3. Loosen the u-bolts through the Category Pin brackets.
4. Slide the hitch along the Deck until the machine is set at the desired offset.
5. Tighten the u-bolts to their specified torque.
24
Maintenance - 45 Series Rotary Tiller