Pre-Operation Checklist - Farm King 45 Series Operator And Parts Manual

Pre-operation Checklist

Efficient and safe operation of the Rotary Tiller requires that each operator reads and understands
the operating procedures and all related safety precautions outlined in this section. A pre-operation
checklist is provided for the operator. It is important for both personal safety and maintaining the
good mechanical condition of the Tiller that this checklist is followed.
• Before operating the machine and each time thereafter, the following areas should be checked
off:
□ Lubricate the machine per the schedule outlined in the Service and Maintenance Section.
□ Use only a tractor of adequate power and weight to pull the machine.
□ Check that the machine is properly attached to the tractor. Be sure retainers are used on the
mounting pins.
□ Check the oil level in the gearbox. Add as required.
□ Check that the PTO driveline shield turns freely and that the driveline can telescope easily.
Clean and lubricate if required.
□ Check the blades. Be sure they are not damaged or broken and are bolted securely to the
rotor. Repair or replace as required.
□ Remove any entangled material on rotating parts.
□ Install and secure all guards, doors and covers before starting.
□ The four socket set screws on the inside of the PTO clutch assembly must be turned out as far
as they go to engage the clutch.
Start-up - 45 Series Rotary Tiller
11