Quick Start - Pure Digital Evoke-2 Owner's Manual

Rear Panel

Quick start

This section provides information on how to set up and start using your EVOKE-2. For further details on using your radio see Connecting up on
page 4 and Using your EVOKE-2 on page 6.
1. Fully extend the telescopic aerial.
2. Attach the mains adapter and plug in to your power supply or insert six 'C' size 1.5V batteries into the battery compartment.
3. Push the Power button to switch the unit on. The LCD will light up and the display will show 'PURE EVOKE-2' and a progress bar on the
bottom line indicates the progress of an autotune to find the DAB stations available in your area. If no stations are found you will be
presented with a series of options which you can use to retry the tuning process or adjust your aerial position, see Tuning for the first time
on page 6. The stations found will be stored in alphanumeric order and the first station on the list will be selected.
4. Adjust the Volume control if necessary to hear it.
5. Turn the Tune knob to see all the DAB stations available and push to select and listen to another station or push the DAB/FM button to
switch to FM mode and select FM stations.
3
Aerial socket for connection to the supplied telescopic or other aerial
Headphone socket (3.5mm) for connection to headphones
Digital Out socket (optical S/PDIF) digital output (DAB only) for
connection to an external amplifier or recorder
Stereo Line Out socket (3.5mm) analogue output (DAB and FM) for
connection to an external amplifier or recorder
9V DC for connection to mains adapter
Battery compartment for six size 'C' cells