Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pure Digital EVOKE 1XT
Summary of Contents for Pure Digital EVOKE 1XT
- Page 1 EVO KE - 1 Now pla yin g...
-
Page 2: Controls And Connectors
Controls and Connectors Front panel Rear panel Autotune – press and release to scan UK only Band III. Press and hold for around two seconds to scan the full range of digital frequencies in Band III. Standby - press to switch between standby mode and power on Timer - press and use Tune to set a countdown timer which will sound an alarm after the period you set (range from 1 min to 23hr 59 mins) Info - press and repeat to change the text shown on the bottom of the... -
Page 3: Changing Stations
Multiplex the current station belongs to. Multiplexes or ensembles are groups of stations owned and broadcast by a single operator. Time and date updated regularly from the current multiplex. If your radio has been unplugged from the mains there may be a slight delay before the time appears when you switch it on. -
Page 4: Setting An Alarm
Note If you set a radio alarm and the station is not available when it is due to go off, a tone alarm will sound instead. When the alarm goes off, EVOKE-1 have chosen. -
Page 5: Setup Options
Setup options Press the Menu button, turn the Tune knob and push to select alarm settings or one of the following setup options. Station order Changes the order of stations on your station list. Turn the Tune knob to scroll through the following options and push to select one: Alphanumeric Displays all stations in alphanumeric order. -
Page 6: Tuning Aid
The DRC (Dynamic Range Control) level of a broadcast is set by the station and sent with the signal. At the time of writing in the UK only stations such as BBC Radio 3 and 4 regularly broadcast a DRC level. Check with the broadcasters to find out if they use DRC on their stations. -
Page 7: Hints And Tips
My alarm didn’t work Check the alarm settings and make sure that the alarm is set to ‘On’ (If in standby you should now see an alarm icon on the screen). If a radio alarm, make sure the volume was turned up. Check that you don’t have headphones plugged in. - Page 8 Please return your warranty card to register your product with us. Should you have a problem with your unit please contact your supplier or contact PURE Digital Support at the address shown on the rear of this manual.
Need help?
Do you have a question about the EVOKE 1XT and is the answer not in the manual?
Questions and answers
how to I switch from digital radio to FM radio on a Pure Evoke-1xt radio?
To switch from digital radio to FM radio on a Pure Evoke 1XT, press the "Source" or "Mode" button on the radio until it changes from DAB to FM.
This answer is automatically generated
My Evoke 1xt has worked well for more than 10 years, but has suddenly gone crazy - e.g presets won't save, and when you turn it on you always get something called "Absolute Radio". Please can you advise? Does it have a long-life battery hidden somewhere?
If the Pure Digital EVOKE-1XT is not saving presets and defaults to "Absolute Radio," try resetting the radio. To reset:
1. Press and hold the Menu button for three seconds until the screen shows "Press Tune to confirm reset."
2. Push the Tune knob to confirm the reset or press no buttons to cancel.
The EVOKE-1XT does not mention having a long-life battery in the provided information.
This answer is automatically generated