Advertisement
Roof cut-outs to prepare the subsequent attachment of vent roofs, pop-up tops and high roofs are currently not available
ex works.
B. Retrofitting of Roof Cut-Outs
1. It is possible to realise roof cut-outs between the bows and the lateral roof chassis. For details, see below.
2. Roof cut-outs between bows B and C are only permitted at wheel base 2,920 mm. Details on the max. possible roof
cut-out permitted in this situation, see section 3.3 Modification of closed attachments. The cut-out must be provided with
the specified reinforcing plate at the left-hand and right-hand side. Both reinforcing plates are to be welded to the roof, the
B- and C-bows as well as to the bow stubs of the bow which has been cut out (between B- and C-bow).
40
Advertisement
