Advertisement
3.
If the loading is increased up to the permitted total weight of 2,890 kg, the permitted axle loads of PR.-No. 0J3
remain unchanged. Under these circumstances, the standard jack (considering the above mentioned boundary
conditions) may also be used.
If the operators are procuring the jack themselves, it is required to adhere to the following instructions on jack
selection:
a) The maximum permitted axle load for transporter chassis can be found under the specifications for the variant with a
permitted total weight of 3,300 kg (applies only to sale cars and mobile homes!). In this case, the maximum permitted
rear-axle load is 1,800 kg. The appropriate max. externally applied load at the previously mentioned platform location
points (provided by us) and at the jack location points at the special attachments (determined by the attachment
manufacturers), is to be determined by the attachment manufacturers.
b) The maximum permitted axle load for transporter chassis can be found under the specifications for the variant with a
permitted total weight of 3,300 kg (applies only to sale cars and mobile homes!). In this case, the maximum permitted
rear-axle load is 1,800 kg. The appropriate max. externally applied load at the previously mentioned platform location
points (provided by us) and at the jack location points at the special attachments (determined by the attachment
manufacturers), is to be determined by the attachment manufacturers.
c) For changing a wheel, the jack must be extendable up to a supporting height/total height of min. 470 mm, if the above
mentioned platform location points are used to mount the spare wheel as a replacement of a damaged vehicle wheel
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines (online body
guidelines). Data status August 2007
37
Advertisement
