Drive Shaft - Encore 61K650P Operator's Manual

Maintanence Reference Information
E.
A. Control Arm Pivots
1 Pump / 100 Hours
B. Caster Support Bearing
5 Pumps / 250 Hours
C. Front Caster
2 Pumps / 40 Hours
D. Pivot Joints ( Left & Right Side)
1 Pump / 40 Hours
MAINTENANCE
CHECK AND ADD ENGINE OIL
CHECK FOR LOOSE OR LOST NUTS AND SCREWS.
CHECK FOR FUEL AND OIL LEAKAGE.
CHEAK OR CLEAN AIR INTAKE SCREEN.
CLEAN AIR CLEANER FOAM ELEMENT.
CLEAN AIR CLEANER PAPER ELEMENT.
CLEAN DUST AND DIRT FROM CYLINDER AND
CYLINDER HEAD FINS.
TIGHTEN NUTS AND SCREWS.
CHANGE ENGINE OIL.
CLEAN AND REGAP SPARK PLUG.
CHANGE OIL FILTER.
REPLACE AIR CLEANER PAPER ELEMENT.
CLEAN COMBUSTION CHAMBER.
CHECK AND ADJUST VALVE CLEARANCE.
CLEAN AND LAP VALVE SEATING SURFACE.
: SERVICE MORE FREQUENTLY UNDER DUSTLY CONDITIONS.
: HAVE AN AUTHORIZED ENGINE MFG DEALER PERFORM THESE SERVICES .
LOCATED UNDER THE ENGINE
TO THE REAR OF THE MACHINE
G.
A.
A.
B.
D.
C.
Grease Fitting Lubrication List
INTERVAL
FIRST EVERY EVERY
DAILY
8 HR. 25 HR. 50 HR.
11
52-61" MID CUT
B.
C.
E. Back Rail
1 Pump / 40 Hours
F.

Drive Shaft

1 Pump / 40 Hours
G. Power Shaft Bearings
1 Pump / 250 Hours
EVERY EVERY EVERY
100 HR. 200 HR. 300 HR.
F.
72" MID CUT
GEAR BOX
GEAR BOX
LOCATED TO REAR
OF THE DECK
NOTE:
Consult Engine Manual for
Engine Manufactures
Recommendations
Operation and Maintenance
Information.
on