4-CARE AND MAINTENANCE
CLEANING YOUR WINE COOLER
Turn off the power, unplug the appliance, and remove all items including shelves and rack.
Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda with a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
VACATION TIME
Short vacations: Leave the Wine Cooler operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off
the appliance. Clean and dry the interior thoroughly. To prevent door and mold growth, leave the
door open slightly: blocking it open if necessary.
MOVING YOUR WINE COOLER
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. Also protect the
outside of the appliance with a blanket, or similar item.
ENERGY SAVING TIPS
The Wine Cooler should be located in the coolest area of the room, away from heat producing appliances,
and out of the direct sunlight.
WARRANTY
Limited warranty; one full year parts and labor.
2/15/2013
15
Need help?
Do you have a question about the LWC-29S and is the answer not in the manual?
Questions and answers
Tableau, les chiffres n’apparaissent pas comme il faut. On ne peut pas voir le degré de température. Ils sont éclairés seulement en partie.
The temperature readings on the Avantgarde LWC-29S may not display correctly because the temperature can fluctuate depending on whether the interior light is on or off, and depending on the location of the bottles (top, middle, or bottom). Additionally, the zone temperature may vary by +/- 5°F (+/- 3ºC) due to loading and ambient conditions.
This answer is automatically generated