Operating Your Wine Cooler - Avantgarde LWC-29S Instruction Manual

2 zones
Table of Contents

Advertisement

Available languages

Available languages

3-OPERATING YOUR WINE COOLER

The wine cooler should be placed where the ambient temperature is between 15 to 25 ºC. If the ambient
temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The
zone temperature may have a difference of +/- 5°F (+/- 3ºC) from setting depending on loading
and ambient conditions.
DUAL ZONE CONTROL PANEL
ON/OFF POWER
To turn ON/OFF the appliance, press the ON/OFF button
SETTING THE TEMPERATURE CONTROL
The temperature preset at the factory is 50°F (10°C) . In order to extend the compressor life,
please restart wine cooler after 3 minutes.
Set the desired cooling temperature by pressing the button
your desired temperature. Each depression of the buttons will scroll through the available
temperature settings in increments of 1 degree.
This unit has the option to display temperatures in either Celsius or Fahrenheit. To change the
setting of the unit from "F" to "C" (or vice versa) press simultaneously the
for 3 seconds. First, make sure the unit is unlocked.
 You can turn the interior light on or off by pushing the
For sparkling wine the temperature should be set between 45-47 F (7-8 C)
For white wine the temperature should be set between 48-54 F (9-12 C)
For red wine the temperature should be set between 55-65 F (13-18 C)
2/15/2013
.
"UP" or
button.
"DOWN" to set
and
button
13

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LWC-29S and is the answer not in the manual?

Questions and answers

Diane
February 16, 2025

Tableau, les chiffres n’apparaissent pas comme il faut. On ne peut pas voir le degré de température. Ils sont éclairés seulement en partie.

User image 67b1f8be31802
1 comments:
Mr. Anderson
May 14, 2025

The temperature readings on the Avantgarde LWC-29S may not display correctly because the temperature can fluctuate depending on whether the interior light is on or off, and depending on the location of the bottles (top, middle, or bottom). Additionally, the zone temperature may vary by +/- 5°F (+/- 3ºC) due to loading and ambient conditions.

This answer is automatically generated

Table of Contents