Parrot MKi + CK3100 range 2008 Installation Manual page 4

5008
1
Insert the removal tools into the
slots on each side of the radio.
3
Using the plastic trim tools, unclip
the display and the air vent.
5
Using the plastic trim tools,
unclip the clip located on the left
of the dashboard.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Disassembly 1 / 2
Unclip, pull and lift the radio making
sure you properly disconnect the
connector and the antenna.
Then remove them without
disconnecting them.
Release the fuse box cover.
2
4
6