JVC GR-AX18EG Instruction Manual page 44

Original tape (camcorder)
1 3
IN OUT IN OUT
Edited tape (VCR)
RM-V700U
(provided with GR-AXM28 only)
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Player (JVC VCR)
To R.A. EDIT
Editing cable
(3.5 ø -3.5 ø,
mini-plug cable)
To
PAUSE IN
2
IN OUT
STOP
MENU Jog Dial
VCR REC STBY
ON/OFF
AV OUT
AV IN
Recording deck
RM-V700U
(provided with
GR-AXM28 only)
AUTOMATIC EDITING TO VCR
ENGAGE VCR'S RECORD-PAUSE
MODE
1
Point the remote control towards the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press the MENU Jog Dial on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
While editing, the R.A. Edit counter of the scene
which is beging copied is shown with a blinking
highlight.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
If you performed step 1
CONNECTIONS"), keep the remote control pointed at
the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
Using the RM-V700U, it is also possible to perform deck-to-
deck Random Assemble Editing. The playback deck must be
an R.A. Edit-capable JVC VCR. The recording deck can be . . .
a VCR other than JVC, or
a JVC VCR which has neither a Remote PAUSE nor an
R.A. EDIT connector
How to use:
— Connect the playback deck and RM-V700U as shown on
the left.
— Set the RM-V700U to correspond to the brand of the
recording deck. (
— For Random Assemble Editing procedure, please refer to
the instruction manual of the JVC VCR you are using as
the playback deck.
Notes:
RM-V700U cannot be used to control the playback deck.
RM-V700U is capable of controlling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with
some brands and models). Other buttons cannot be used.
To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
on page 43 ("MAKE
C
pg.42)
45
EN