JVC GR-AX18EG Instruction Manual page 26

This feature allows you to set the parameters for Animation and Time-Lapse
REC TIME
recording (
INT. TIME This feature allows you to set the parameters for Self-Timer (
Lapse recording (
TALLY LAMP ON
OFF
CHARACTER
Allows you to enter an original title of up to 18 characters (
This number is necessary when connecting the camcorder to a device such as a
JLIP ID NO.
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
DEMO MODE OFF
ON
= Factory setting and when the Select Dial is set to AUTO LOCK
pg. 33).
pg. 33).
The tally lamp comes on to signal the start of recording.
The tally lamp remains off at all times.
Automatic demonstration will not take place.
Demonstrates certain functions such as the Fader, Instant Titles
etc. When "DEMO MODE" is set to "ON" and the Menu Screen
is closed, demonstration starts.
NOTES:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
"DEMO MODE" is set to "OFF" automatically.
During demonstration, all functions except zoom are disabled.
27
EN
pg. 32) and Time-
pg. 24).