JVC GR-AX18EG Instruction Manual page 16

5SEC. REC
RETAKE (R/F)
LCD monitor or viewfinder
PAUSE
5S
5Sec. Rec mode indicator
FEATURE: Quick Review
PURPOSE: To check the end of the last
recording.
OPERATION: 1) Press "
during the Record-Standby mode.
Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
NOTE: Distortion may occur at start of
playback. This is normal.
FEATURE: Retake
PURPOSE: To re-record certain segments.
OPERATION: 1) Make sure the camcorder is in the
Record-Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording. Pressing "F" forwards
the tape and pressing "R" reverses
it.
3) Press Recording Start/Stop Button
to start recording.
NOTE: Noise may appear during Retake.
This is normal.
FEATURE: 5Sec. Rec (5-sec. Recording)
PURPOSE: To record a scene for 5 seconds,
providing quick scene transitions like
those seen in TV programmes.
OPERATION: 1) During Record-Standby, press
5SEC. REC. "
5Sec. Rec is reserved.
2) Press Recording Start/Stop Button.
Recording starts, and after
5-second recording is finished, the
camcorder reenters the Record-
Standby mode automatically.
To cancel the 5Sec. Rec.
function, press 5SEC. REC again
so that "
NOTE: The Fader (
activated by pressing 5SEC. REC.
17
EN
" and release quickly
5S" appears and
5S" disappears.
pg. 22) cannot be