Table of Contents
Advertisement
C.2.2 Windows NT Errors
Spectrum24 Wireless LAN Adapter Product Reference Guide
When errors occur during driver installation, they
appear in the System Log. Use the Event Viewer
program from the Administrative Tools group to view
the System Log. Locate the SLA41ND4 or Service
Monitor entries. If the driver fails to load, one of the
following messages display in the System Log.
SLA41ND4: Could not allocate the resources necessary for operation.
•
The driver could not allocate enough memory for
internal data.
SLA41ND4: Has determined that the adapter is not functioning
properly.
•
The driver could not initialize the Spectrum24 PC
Card or PCI adapter. Possible problems include:
–
The Spectrum24 PC Card or PCI adapter
firmware could be corrupted. Use NICUpdate
to verify the firmware status.
–
The Spectrum24 PC Card or PCI adapter could
have a hardware problem.
–
The PCMCIA controller or host bus adapter is
not opterating properly. Use an alternate
PCMCIA socket or PCI slot.
Troubleshooting
C-5
Advertisement
Table of Contents
Troubleshooting
