Windows Nt 4.0 Troubleshooting - Symbol LA-4121 Reference Manual

C.2 Windows NT 4.0 Troubleshooting
Spectrum24 Wireless LAN Adapter Product Reference Guide
Use the tools provided by Windows NT and LAN
analyzers (i.e. FTP Software NETXRAY, Novell LAN
analyzer) to diagnose problems.
• A resource conflict (usually IRQ or I/O base
address) caused the driver not to load.
– Check 41ND4 entries in the System Log to
look for the conflicts.
• Check Service Monitor entries in the System Log to
look for the conflicts.
– Use the Windows NT Diagnostics program to
locate a free resource.
Resource conflicts could exist without an entry in the
event log when another adapter failed to register its
resources. When event log entries do not appear and
the ESSID is set appropriately, try different settings with
the Memory Base
IO Port Address
• No resource conflicts were detected, but the system
does not attach to the network.
– Verify the ESSID of the Spectrum24 WLAN
Adpater matches the ESSID of the AP . Use NCPA
to modify ESSID.
– Verify the Mandatory BSSID setting of the
Spectrum24 WLAN adapter is set to 0 or
matches the BSSID of the AP . Use NCPA to
modify the Mandatory BSSID.
Address, Interrupt Number
parameters.
Troubleshooting
and
C-3