Steering System - Audi A6´05 323 Service

Chassis

Steering system

A conventional, hydraulic rack-and-pinion servo
steering system is used.
A high degree of sporty steering precision
has been achieved through the consistent further
development of the steering used in the
predecessor model. The speed-dependent
Servotronic servo-support is available as standard.
Servotronic II, which was already used in the
Audi A8, is used (set-up and mode of operation:
see SSP 285).
Servo oil cooler
52
Oil reservoir
Suction hose
Steering pump
Return hose
A mechanically adjustable steering column is
used in the basic model. Electrical adjustment is
optional.
As in the case of the A8´03, the A6´05 also has an
electrical steering lock.
A newly developed three/four-spoke steering-wheel
generation is used.
Steering gear
Return line
Expansion hose
323_054