JVC GR DVL 200 Instructions Manual page 41

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors
* When connecting the cables, open this cover.
** The Audio cable is not required for watching still
images when the VIDEO/DSC Switch is set to "
Connector cover*
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
NOTES:
It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack
( pg. 7).
When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core
filter reduces interference.
To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder's Power
Switch to " " or "
Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the
camcorder is turned on.
If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
Audio/Video cable
[mini-plug to RCA plug]
(provided)
Core filter
To AV
To S
Core filter
pg. 40).
", then set your TV to the appropriate input mode.
When the S-Video
cable is not used.
".
Yellow to VIDEO IN
White to
AUDIO L IN**
Red to
AUDIO R IN**
S-Video cable
To S-VIDEO IN
(provided with
GR-DVL200EK,
optional for
GR-DVL200EG)
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the
Menu Screen (
•Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
OR
Image Number/Total Number of Images for D.S.C.
Playback
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen (
on the remote control (provided).
EN
TV
VCR
To TV or VCR
pg. 32).
pg. 32).
pg. 32). Or, press DISPLAY
41