Table of Contents
Advertisement
AIR CUSHION HOVER MOWER OPERATOR'S MANUAL
16. If gasoline is spilled, do not attempt to start the
engine but move the machine away from the area of
spillage and avoid creating any source of ignition
until the gasoline vapor has dissipated.
17. Before using, always visually inspect to see that the
blade, bolts and spacers are not worn or damaged.
Replace a worn or damaged blade.
18. Stop the engine if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and
from the area to be mowed.
Engine Operation
Review the complete operation and safety
instructions provided in the owner's manual of the
respective engine manufacturer – which is included
in the information packet of this unit.
Any service, warranty or replacement parts issues for
the engine should be directed to Authorized Service
Dealers of the respective engine manufacturer.
Operating Controls
Make sure the handle sections are properly
tightened and in the upright position before
starting engine.
1. Engine Stop Lever
This stops the engine and the rotation of the cutting
blades.
STOP
Evergreen Turf Equipment, LLC • 1028 4
RUN
th
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com
2. Throttle Control
This controls the engine speed and ultimately the
unit's cutting and hovering. It also activates the
engine's choke mechanism for starting - when
positioned as shown.
NOTE: The throttle control does not stop the
engine, release the engine stop lever.
Mower Operation
Make sure the ground is flat and clear of debris and
do not attempt to start on a sloped / inclined surface.
Make sure the fuel tank cap is properly installed and
tightened.
1. Starting
a. Move the fuel valve to the open position
Keep the fuel valve in the OFF position when the unit
is transported or not in use for an extended period.
Advertisement
Table of Contents
