Operating Controls; Engine Operation - California Trimmer RC190-GCV160 Operator's Manual

Preparation & Inspection (continued)
8. Use care when loading or unloading the machine
into a trailer or truck.
9. Never operate machine in a closed area.
10. Keep all nuts and bolts tight to be sure the
equipment is in safe working condition.
11. Never tamper with safety devices. Check their
proper operation regularly.
12. Keep machine free of grass, leaves, or other debris
build-up. Clean up oil or fuel spillage and remove
any fuel-soaked debris. Allow machine to cool
before storing in an enclosed space.
13. Never make any adjustments or repairs with the
engine running. Disconnect the spark plug wire and
ground against engine to prevent unintended
starting.
14. Do not change the engine governor setting or over-
speed the engine.
15. Maintain or replace safety and instruction labels, as
necessary.
16. If gasoline is spilled, do not attempt to start the
engine but move the machine away from the area of
spillage and avoid creating any source of ignition
until the gasoline vapor has dissipated.
17. Before using, always visually inspect to see that the
blade, bolts and spacers are not worn or damaged.
Replace a worn or damaged blade.
18. Stop the engine if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and
from the area to be mowed.

Engine Operation

Review the complete operation and safety
instructions provided in the owner's manual of the
respective engine manufacturer – which is included
in the information packet of this unit.
Any service, warranty or replacement parts issues for
the engine should be directed to Authorized Service
Dealers of the respective engine manufacturer.
California Trimmer • 1028 4
HOVER MOWER OPERATOR'S MANUAL
th
St. SW, Bldg. A • Auburn, Washington 98001 • CalTrimmer.com

Operating Controls

Make sure the handle sections are properly
tightened and in the upright position before
starting engine.
1. Engine Stop Lever
This stops the engine and the rotation of the cutting
blades.
STOP
Do not operate the unit if the engine stop lever is
damaged or not functioning correctly.
1. Engine Stop Lever – Adjustment
If necessary, the tension of the cable can be changed
using the adjuster mount. See mower operation for
more information.
2. Throttle Control (Honda engine)
This controls the engine speed and ultimately the
unit's cutting and hovering. It also activates the
engine's choke mechanism for starting - when
positioned as shown.
RUN
Page 5