Key Components; Safety Instructions - California Trimmer RC190-GCV160 Operator's Manual

AIR CUSHION HOVER MOWER OPERATOR'S MANUAL
Assembly & Set-up (continued)
2. Attach the handle inserting the pins on each side and
install the cotter pins with the washer placed beneath,
then bend as shown to secure in place.
3. Attach the upper handle section to the lower handle
section using the bolts and knobs. Fasten the
corrugated tubing (which covers the throttle and
engine stop cables) to the handles using the tie
straps included.
NOTE: the throttle control and engine stop lever
adjuster must be on the right side from the operator
position.
4. Verify that the engine stop lever is installed and it
pivots upward completely against the handle.
Evergreen Turf Equipment, LLC • 1028 4
The image below identifies key components of the
California Trimmer Air Cushion Hover Mower so take the
time to familiarize yourself with them and their function.
The following safety alert symbols are use in these
instructions in conjunction with important safety
messages related to the operation of the unit and
potential hazards. As you familiarize yourself with
the various features and functionality of this mower,
please take note of the subjects and specific
instructions that include these images...
...WILL cause serious or fatal injury if the
instructions are not followed.
...CAN cause serious or fatal injury if the
instructions are not followed.
th
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com

Key Components

Safety Instructions