Native Instruments Audio 4 DJ User Manual page 16

Software Setup
1. Open TRAKTOR .
2.
Open Preferences > Audio Setup > Audio Setup.
3. From the a d list, select the AUDIO 4 DJ entry.
udIo evICe
4. Now open Preferences > Audio Setup > Output Routing.
5. Choose Internal Mixing Mode.
6. Choose a channel pair 3/4 for the Output Monitor for pre-listening the Tracks.
7. Choose a channel pair 1/2 (Ch. A) for the Output Master.
8. Close the Preferences.
9. Adjust the headphones volume inside TRAKTOR with the v
Panel and on the AUDIO 4 DJ front with the Headphone Volume knob to a comfort-
able level.
Test the Setup
1.
From TRAKTOR 's list window, drag tracks in both decks and hit the P
B .
uttonS
2. Drag the C all the way to the left (Deck A). Click on the C
roSSfader
Mixer Strip of Deck B. You should hear the track playing on Deck B only in your head-
phones, while the track in Deck A is playing over your speakers.
K in the Master
ol noB
/P
lay auSe
B in the
ue utton
! !
The AUDIO 4 DJ has to be set to The AUDIO 4 DJ has to be set to
Line Mode for use in this setup. Line Mode for use in this setup.
Getting Started: AUDIO 4 DJ – 16