Advertisement
2.3 Status LEDs
1 - CHANNEL A and CHANNEL B:
These LEDs provide information about the AUDIO 4 DJ's audio inputs and outputs: they
light up green to indicate that an audio signal is present. If the input signal is too loud
and causes clipping, the LEDs turn red.
2 - USB:
When the AUDIO 4 DJ is connected, this LED lights up green. If the USB status LED re-
mains black although the AUDIO 4 DJ is connected to your computer, please refer to the
"USB Troubleshooting" section in the AUDIO 4 DJ User Manual.
3 - INPUT MODE (Channel A and Channel B):
Colored LEDs help you identify the Input Mode currently selected.
Use the AUDIO 4 DJ Settings Tool to select an Input Mode, as explained in chapter 3, and
thus adapt the AUDIO 4 DJ 's inputs to your line-level or phono devices.
Getting Started: AUDIO 4 DJ – 12
Advertisement
