ZALMAN HD135 User Manual page 15

Place the Temperature Sensor on a place of preference inside the
Enclosure.
Connect the Motherboard Power Connector to the motherboard's Front
Panel Port (refer to the motherboard manual).
Connect the Fan Connector to the Fan installed on the Top Cover, and
assemble the Top Cover.
Motherboard
Front Panel Port
Power Connector
Note)
Tie the VFD multi-cables with the enclosed Clipper, and fix
them on to the Bottom Plate with the use of a Clipper to
ensure that the cables are not disconnected from the VFD.
14 The specifications of any product may change without prior notice to improve performance.
Bottom
Plate
Fan
Motherboard
Fan
Connector
VFD
Temp. Sensor 1
Temp. Sensor 2
Case
Power SW
Power SW
Connector
Header
HD135
Top
Cover
Fan
Case