Monogram ZIS48N Custom Options Manual And Installation Instructions page 27

Tools and materials
required:
• #2 Phillips screwdriver
• Stubby Phillips screwdriver
• Drill and appropriate bits
• Safety glasses
• Custom panels
Parts List:
Kit
Freezer Door
contents
A. Top trim
B. Side trim
C. Bottom trim
Fresh Food Door
D. Top trim
E. Side trim
F. Bottom trim
G. Panel support
H. 4-3/8" screws for
I. Grille support panel
J. Wood screws #6 1/2"
This kit provides for the installation of 3/4" custom door
and grille panels, using the standard full length handle.
This kit contains all the necessary parts to apply 3/4"
panels on dispenser and non-dispenser models. Follow
the instructions for Option 1 when applying custom
panels to a non-dispenser model or dispenser model
using custom collar trim. Follow instructions in Option 2
for a dispenser model using the standard full-width
dispenser trim.
A
B
C
D
E
brackets (4)
F
support brackets (20)
and screws
G
ZKT48–8 screws
flat-head screws
ZKT48–30 screws
ZKT48 Trim Kit
3/4" Custom Panels
These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
using custom collar trim.
Option 2—For dispenser model using the standard
full-width trim.
H
I
J
If you are using custom
Note:
handles, see ZKHT1 Installation
Instructions. For tubular
stainless steel handles, see
ZKHTSS1 Installation
Instructions.
27