Led Indicators And Connectors; For Vigor2130 - Draytek Vigor 2130 Series User Manual

Note: For the other buttons shown on the web pages, please refer to Chapter 4 for detailed
explanation.
1 . 3 L E D I n d i c
1 . 3 L E D I n d i c
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
1 . 3 . 1 F o r V i g o
1 . 3 . 1 F o r V i g o
a t o r s a n d C o n
a t o r s a n d C o n
r 2 1 3 0
r 2 1 3 0
LED
ACT
(Activity)
HPA
WAN
LAN
1/2/3/4
USB1/2
VPN
QoS
DoS
Interfac
e
WAN
LAN
(1/2/3/4)
USB
(1/2)
n e c t o r s
n e c t o r s
Status
Blinking
Off
On
Off
On (Orange)
On (Green)
Off
Blinking
On (Orange)
On (Green)
Off
Blinking
On
Blinking
On
On
On
Blinking
Description
Connector for accessing the Internet.
Connectors for local networked devices.
Connector for USB storage device (Pen Driver/Mobile
HD) or printer or 3G backup.
2
Explanation
The router is powered on and running
normally.
The router is powered off.
Hardware NAT is enabled.
Hardware NAT is disabled.
The port is connected with 100Mbps.
The port is connected with 1000Mbps.
The port is disconnected.
It will blink while transmitting data.
The port is connected with 100Mbps.
The port is connected with 1000Mbps.
The port is disconnected.
The data is transmitting.
A USB device is connected and active.
The data is transmitting.
The VPN tunnel is active.
The QoS function is active.
The DoS/DDoS function is active.
It will blink while detecting an attack.
Vigor2130 Series User's Guide