Ec Declaration Of Conformity - Black & Decker KS900S Instructions Manual

Run the battery down completely, then remove it from

the tool.
Batteries are recyclable. Place the battery(s) in a

suitable packaging to ensure that the terminals cannot
be short-circuited. Take them to any authorised repair
agent or a local recycling station.
Technical data
Voltage Vac 230
Rated input W
-1
No-load speed min
Max. depth of cut
Wood mm 85
Steel mm 5
Aluminium mm 15
Weight kg
(with laser) kg
Level of sound pressure according to EN60745:
L (sound pressure) 87 dB(A), uncertainty (K) 3 dB(A)
pA
L (sound power) 98 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Cutting wood (a ) 8.5 m/s
h, CW
Cutting sheet metal (a
uncertainty (K) 1.5 m/s
12
KS900S KS900SL KS950SL
TYPE 1 TYPE 1 TYPE 1
230 230
620 620 650
800-3200 800-3200 800-3200
85 85
5 5
15 15
2.65 2.65 2.65
2.95 2.95 2.95
2
, uncertainty (K) 1.5 m/s
2
) 7.3 m/s ,
h,CM
2

EC declaration of conformity

MACHINERY DIRECTIVE
KS900S, KS900SL, KS950SL
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN60745-1, EN60745-2-11
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black
& Decker.
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
2
07-07-2010
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your statutory
rights. The guarantee is valid within the territories of the
Member States of the European Union and the European
Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black & Decker
guarantees to replace defective parts, repair products
subjected to fair wear and tear or replace such products to
make sure of the minimum inconvenience to the customer
unless:
The product has been used for trade, professional or hire

purposes.
The product has been subjected to misuse or neglect.

The product has sustained damage through foreign

objects, substances or accidents.
Repairs have been attempted by persons other than

authorised repair agents or Black & Decker service staff.