Exponent Application & Driver Uninstall; Exponent Application & Driver Installation - DAGE-MTI Excel Series User Manual

Exponent Application & Driver Uninstall
If you have previously installed Exponent software and want to install a newer version,
you will need to complete the following steps:
1. Uninstall all (attached) cameras from the system by locating the camera in the
"Windows Device Manager", "right-click" the device, and select "Uninstall". (To access
the "Windows Device Manager"- "Right-click" the "My Computer" icon, select
"Properties", navigate to the "Hardware" tab and click "Device Manager")
2. Unplug the camera.
3. Go to the "Start" Menu and open the "Control Panel". Use "Add/Remove Programs" to
remove Exponent software from your computer. Alternatively there is an uninstall
option available if you run the setup disk used to originally install the software.
IMPORTANT: To insure correct operation of new software and drivers, the old software and
drivers must be removed prior to installing the new versions. Do not use the "uninstall" option
contained in newer versions to remove older software versions. (Use the original setup disk
or "Add/Remove Programs" inside Windows "Control Panel" to uninstall)
Exponent Application & Driver Installation
Insert the DAGE-MTI EXPONENT Installation CD into the computer's CDROM drive. If
the Auto Run Wizard does not automatically start after placing the installation CD in the
drive, browse to your CD-ROM directory and run the "Exponent Installer.msi" file. The
Exponent Setup Wizard will be launched. Read the Warning and click "Next".
NOTE: You must install the Exponent software and device driver before connecting the
camera to your computer; otherwise your computer will not use the correct driver. If this
happens, you may need to manually install the driver.
8