Source; Timelapse Setup - DAGE-MTI Excel Series User Manual

o Source- Chooses the input control for an image capture.
Image Capture Button- The image capture is controlled by the Image
Capture Toolbar button. Successive button pushes places successive camera
images into the directory.
Timelapse Image Acquisition- When the Image Capture Toolbar button is
pressed, Exponent saves successive images in the directory as controlled by
the TimeLapse Setup in the lower portion of the Autosave Toolbox. The Image
Capture Toolbar button is lit during the timelapse sequence, then extinguishes
when the timelapse sequence has completed.
Trigger Input- The Trigger Input Source allows image saves per the setup in
the Trigger Toolbox. Camera images are saved each time the camera is
triggered, whether software or external. See the "Trigger Toolbox" and
"Auxiliary Connector" sections for more information.
General Purpose Input- This choice uses the GPIO-1 input pin located on
the camera's Auxiliary Connector which can be used with a "Footswitch" to
allow hands free image capture. If the input is grounded, the camera image is
frozen and stored per the Autosave Toolbox. When the input is released, the
image goes back to live view. See the "Auxiliary Connector" section for more
information on the optional footswitch and using the GPIO-1 input.
o Timelapse Setup- Provides control for the number of images and the time
between image captures when the "Timelapse Image Acquisition" is chosen as
the Autosave source.
22