Yamaha YZF-R6 L 2000 Service Manual page 17

Throttle cable
1
Right handlebar switch lead
2
Thermo unit lead
3
Reservoir tank breather hose
4
Carburetor idle adjusting cable
5
Pickup coil connector
6
Neutral switch connector
7
Rear brake switch connector
8
Right handlebar switch connectors
9
Throttle position sensor connector
10
Main switch connectors
11
Left handlebar switch connectors
12
Neutral switch lead
13
Fuel pump connector
14
Rear brake switch lead
15
Starter motor lead
16
Battery negative (–) lead
17
CABLE ROUTING
Fuel sender connector
18
Coolant reservoir tank cap
19
Crankcase breather hose
20
Heat protector
21
Radiator fan motor lead
22
Clutch cable
23
Left handlebar switch lead
24
Starter cable
25
Main switch lead
26
A Route the clutch cable through the guide.
B Fasten the handlebar switch leads (left and right)
and main switch lead with a band.
Locate the end of band to inside.
C Route the ignition coil lead and handlebar switch
leads (left and right) over the heat protector.
D Route the radiator hoses under the heat protector.
–9–
SPEC