Yamaha YZF-R6 L 2000 Service Manual page 14

Fuel pump lead
1
Pickup coil lead
2
Thermo switch
3
Clutch cable
4
Rear brake switch lead
5
A Route the ignition coil lead and thermo switch lead
over the heat protector plate.
B Route the clutch cable through the guide on the
frame.
C Position the face of steel clip up ward.
D Route the coolant hoses (3 hoses) under the heat
protector plate.
E Fasten the clutch cable to the coolant hose protec-
tor with a plastic band.
CABLE ROUTING
F Fasten the rear brake switch lead to the footrest
bracket with a plastic locking tie and cut the end of
locking tie.
G Fasten the fuel pump lead and rear brake switch
lead with a plastic band on the fuel pump bracket.
–6–
SPEC