Yamaha YZF-R6 L 2000 Service Manual page 15

AC magneto lead
1
Reservoir tank breather hose
2
Sidestand switch lead
3
Oil level switch lead
4
Speed sensor lead
5
Fuel pump lead
6
Neutral switch lead
7
A Route the throttle cable through inside of the radia-
tor bracket and outside of the wireharness.
B Fasten the wireharness, radiator hose and fan mo-
tor lead with a plastic band.
Locate the end of band to inside.
Push the radiator fan motor lead connector be-
tween radiator hose and wireharness.
CABLE ROUTING
C Don't touch the wireharness with the throttle cable
pully. Route the wire harness under the radiator
hose.
D Route the fuel tank breather hose and fuel tank
drain hose between reservor tank breather hose
and wireharness.
E Route the wireharness through the slite of rear
fender.
F Route the seat lock cable outside of the wire-
harness.
G Route the rear turn signal light leads (left and right)
through the hole of rear fender.
H Route the fuel tank drain hose and the fuel tank
breather hose behind the curve of the under
cawl.
7
–7–
SPEC