Remington HH-600T-KFA User's Manual & Operating Instructions page 15

Symptom
E4
E5
Other Problems
© 2014 Pinnacle Products International, Inc.
Troubleshooting (Continued)
Possible Cause(s)
Sensor disconnected
Temperature limit safety device is
overheated
1. Poor Combustion
- Flames extending beyond heater
- Low heat output
2. Power Failure
- No power supply to heater
A. Check limit control thermostat
B. Check sensor connection
1. Wait until unit cools down
1. Poor Combustion
- Adjust Pump Pressure (see page 10)
2. Power Failure
- Check / Replace Fuse
15
Kerosene User's Manual
NEVER LEAVE HEATER
UNATTENDED WHILE BURN-
ING OR WHILE CONNECTED
TO A POWER SOURCE
Solution