Cable Connections - HP 200 G1 Microtower Maintenance & Service Manual

When removing the power supply power cable from the ATX_PWR connector on the system board,
always follow these steps:
1. Squeeze on the top of the retaining latch attached to the cable end of the connector (1).
2. Grasp the cable end of the connector and pull it straight up (2).
CAUTION:
damage the cable and result in a failed power supply.

Cable connections

System board connectors are color-coded to make it easier to find the proper connection.
Connector Name
ATX_POWER
CPU_PWR
CPU_FAN
INT_SPKR
F_PANEL
F_AUDIO
F_USB2
SATA0
SATA1
Always pull the connector - NEVER pull on the cable. Pulling on the cable could
Connector Color
white
white
white
white
black
yellow
white
dark blue
white
Description
Power supply, 24-pin
Power supply, 4-pin
Heat sink fan
Speaker
Power switch
Front I/O audio
Front I/O USB
Primary hard drive
Primary optical drive
Cable management
35