Table of Contents
Advertisement
www.agelectronica.com
www.agelectronica.com
4.3
【Network Mode】: TCP and MultiCast can be selected according to your demand. Note: please select again
【Channel Select】: Click the image window to make the selected image window be the current operational
【Start-up】: After entering into preview interface, the 4-way channel image will automatically connect. You
【Preview Start】: Click
【Preview End】 : Click
【Image Capture】 : Click this button to save the current screen image and store it under the temp directory of
【Audio】: Click the audio button to open the audio connected to the current channel, and the state of button
【Talkback】: Click the talkback button to startup the talkback and the state of button will change into green.
【Video Recording】: Select the channel to be recorded and then click the button. Till the state of button
www.agelectronica.com
www.agelectronica.com
Function Introduction
after the page is switched.
channel. The numbers of channels are respectively channel 1: top left; channel 2. top right;
channel 3: low left; and channel 4: low right in turn.
can click
independently.
be known through the state of buttons.
C disk.
will change into green. When switching to other channel, the audio will be also switched to
this channel.
Click the button again to stop talkback.
button to open or close the image of some channel
to connect images of all channels at the same time.
to stop images of all channels. The connection state of current channel can
Page 9 of 36
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
Advertisement
Table of Contents
