Table of Contents
Advertisement
www.agelectronica.com
www.agelectronica.com
【Image Quality Control】:
www.agelectronica.com
www.agelectronica.com
Character Superimposition: You can select the character content and display time to superpose on the
image. The position of display character and time on the image can be also adjusted and the position
coordinates on top left of image is (0, 0).
Cradle Head Protocol: The selected protocol, baud rate, and address must be accordant with the
protocol, baud rate and address of the selected cradle head or dome camera. Otherwise, the cradle head
or dome camera may be out of control.
Detection and Backup: You can set the duration of alarm signal produced by triggering the GPIO. This
setting is used to detect the video signal is lost or not. If lost, the alarm system will be triggered.
Page 13 of 36
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
Advertisement
Table of Contents
