Appearacne And Description; Equipment And Installation; Operating Conditions; Equipment Instalaltion - AG Electronica PTZ-942L Instruction Manual

Network dome cameras
Table of Contents

Advertisement

www.agelectronica.com
www.agelectronica.com
2 Appearance and Description

3 Equipment and Installation

3.1
Operation System: Windows2000server/professional/XP
Network Protocol: TCP/IP
Client PC: P4/128MRAM/40GHD/, and Scaling-Supported Graphic Card and DirectX8.0 Above
3.2
a. Connect the video server into your network or use the cross twine to connect the video server to the PC.
b. Connect the standard 75Ω coaxial-cable to the BNC video input port of the video server.
c. Switch on Power (DC 12V)
d. Under the normal condition, the connection light (orange) of network will light on within 5 seconds, and

4 IE Version Client Side

4.1
1)
www.agelectronica.com
www.agelectronica.com
Power Input: DC12V and 4A
Audio Output Interface: Line Level, Disequilibrium, Single Track and RCA Interface
Audio Input Interface 1: Microphone Input, Disequilibrium, Single Track and RCA Interface
Video Input Interface 1: 220x Sony CCD Camera
International protect level:IP66

Operating Conditions

Equipment Installation
the physical connection of the video server is finished at this point.

Set-Up Service

IP address of each video server is defaulted as 169.254.178.251 and subnet mask is defaulted as
255.255.0.0. Please make the IP address of your computer into the same net section as the video server,
and be same with the subnet mask, such as 169.254.178.55.
Four- Channel Server Interface
Page 7 of 36
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com

Advertisement

Table of Contents
loading

Table of Contents