AG Electronica PTZ-942L Instruction Manual page 30

www.agelectronica.com www.agelectronica.com
After finishing the forwarding service port setting, you can open other machine to connect to the forwarding
server. See the picture.
Among the necessary parameters, the server name is the sign for confirming to connect to a certain server. For
example, this channel forwards the channel 0 of the video server whose name is 123, so this server name must be
the name of this server. In the video server, this name is defaulted as video server. The server address is the address
of forwarding server, and the port refers to the port of the server. The user name and password are the user name
and password of the video server.
Please take notice that the forwarding server only forwards the audio and video of the channel, but not set the
server parameters and use the PTZ operation.
If require to forward in the wide area network, several settings below shall be made:
www.agelectronica.com www.agelectronica.com
If the forwarding server runs at the gateway (the access point of Internet), you are only required to take
notice that port conflict exists or not. The long-distance users can use the management software to
connect this forwarding server directly in accordance with above-mentioned method.
Page 30 of 36
www.agelectronica.com www.agelectronica.com
www.agelectronica.com www.agelectronica.com