Table of Contents
Advertisement
www.agelectronica.com
www.agelectronica.com
After filling above information in, please press the [confirm] button to exit the setup interface, and the system
will automatically connect the distributed servers and play the video.
If you want to delete a certain set distribution, please clear the description, name, address, port and other
contents.
Camera setting consists of the server, channel, cradle head, alarm and others.
It mainly includes the equipment network setting, user password management, dynamic domain name system,
multicast and other functions. Multicast is the optimal approach for solving the problem that a great many of clients
visiting a same video server at the same time. However, please take notice that if you want to realize the multicast
in the wide area network, some routers don't support this function or have not started this function. See the picture.
Note: After modifying the network parameters of the server, you must reset the server.
www.agelectronica.com
www.agelectronica.com
Use DDNS: DDNS is the DDNS client side embedded by the video server. It works together with the
DDNS server side provided by the developer. When using the DDNS function, the server name is the
signal for searching this server. If the server name is incorrectly filled, the error information of failing
to find the server will be returned.
Automatic Connection on Starting: After the software is started, whether connect all the distributed
cameras automatically.
5.3.4 Camera Setting
1)
Server Setting:
2)
Channel Setting: this page of parameters set the parameters, channel alarm modes and date setting of
all the coders relating to the channel. See the picture.
Page 25 of 36
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
www.agelectronica.com
Advertisement
Table of Contents
