List Of Functions; Details Of Function; Language Selection And Setting; Selecting Cooking Functions - Whirlpool Built in oven User Manual

LIST OF FUNCTIONS

After switching on the oven, press the symbol
Press any key to skip the message.
NOTE: The induction first alert can be disabled/enabled through the Settings Menu.
If the induction plate is already properly engaged, when oven is switched on, the induction first alert will
not be shown.
After skipping the induction first alert following indications will be shown:
A
Traditional
Traditional manual cooking functions
D
A. Symbol for highlighted function
B. Highlighted function can be selected by pressing
C. Description of highlighted function
D. Further available, selectable information

DETAILS OF FUNCTION

After selecting the desired function, press button
details.
Cursor
Medium
Zone 1
GRILL POWER
Zone 2
No
PREHEAT
To move between different areas, use buttons
following the order described above. Press
pressing button .
NOTE: In induction mode, only Zone 3 and Zone 4 can be adjusted.
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND SETTING
THE TIME
For correct use of the oven, when it is switched on for the first time you will have to select the desired
language and set the correct time.
Proceed as follows:
1. Press : the display will show the list of the first three available languages.
2. Press buttons
3. When the desired language is highlighted, press
After language selection, the display will flash 12:00.
4. Set the time using buttons
pressed.
5. Confirm your setting by pressing

SELECTING COOKING FUNCTIONS

1. If the oven is off, press button
Recipes
B
Specials
C
--:--
COOK TIME
Grill
--:--
END TIME
and to scroll down the list.
and . To scroll through the numbers more quickly, keep the button
: the display will show the list of functions.
; the display will show the cooking functions.
and the display will show the following indication.
and the display will show further options and related
Zone 3
Zone 4
and : the cursor moves to the adjustable values,
to select the value, adjust it using
to select it.
EN13
and confirm by