Setting Cooking Time; Browning - Whirlpool Built in oven User Manual

2. Confirm by pressing
3. If the proposed temperature is that desired, press
paragraphs to change it. An acoustic signal will sound when the oven has reached the set temperature.
At the end of preheating, the oven automatically selects the conventional function
At this point food can be placed in the oven for cooking.
4. If you wish to set a different cooking function, press

SETTING COOKING TIME

180°C --:--
TEMPERATURE COOK TIME
Forced Air
No --:--
PREHEAT END TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the
maximum time allowed by the selected function, after which the oven switches off automatically.
1. To select the function, position the cursor next to "cooking duration" using buttons
2. Press button to select the setting; "00:00" flashes on the display.
3. Change the value using buttons
4. Confirm the selected value by pressing button
BROWNING (Standard Functions Only)
At the end of cooking, with certain functions, the display indicates the possibility of browning the surface of
your dish. This function can only be used when cooking time has been set.
Cooking finished at 20:00
^ to prolong, ✓ to brown
At the end of cooking time, the display shows "^ to prolong,
starts a 5 minute browning cycle. This function can only be used once after cooking.
SETTING END OF COOKING TIME / DELAYED START
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and
59 minutes. This can only be done once cooking time has been set. This setting is only possible when
pre-heating is not required for the selected function.
180°C - 00:20
TEMPERATURE HH:MM
Forced Air
No 19:20
PREHEAT END TIME
After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end
of cooking time, and thus also the cooking start time, proceed as follows:
1. Position the cursor next to the end of cooking time using buttons
2. Press button to select the setting: the end of cooking time flashes.
3. To delay the end of cooking time, use buttons
4. Confirm the selected value by pressing button
5. Press button . The display indicates which shelf food should be placed on.
6. Press button to activate the function. The oven will start cooking after a period of time calculated
so as to finish cooking at the set time (for example, in the case of a dish which requires a cooking time
of 20 minutes, if the end of cooking time is set to 20:10, the oven will begin cooking at 19:50).
N.B.: during the interval before cooking starts, the oven can in any case be switched on by pressing
button .
At any time during cooking, set values (temperature, grill setting, cooking time) can be changed
using buttons
: the settings are displayed on the screen.
180°C
TEMPERATURE
Forced Air
No
PREHEAT
and
- 00:05
COOK TIME
20:05

Browning

END TIME
180°C
TEMPERATURE
Forced Air
No
PREHEAT
and button as described in previous paragraphs.
, otherwise proceed as described in previous
and select the desired function.
- 00:00 180°C
HH:MM TEMPERATURE
Forced Air
--:-- No
END TIME PREHEAT
to display the desired cooking time.
.
Browning finished at 20:05
to brown". Press button
- 00:20 180°C
HH:MM TEMPERATURE
Forced Air
19:20 No
END TIME PREHEAT
and to set the desired value.
.
EN15
.
- 00:20
HH:MM
19:20
END TIME
.
, and the oven
- 00:20
HH:MM
20:10
END TIME
.