Voice Recognition Commands - Chevrolet 2007 Avalanche Navigation Manual

•
To cancel a command or if the system
response does not match your verbal
command, press and hold the talk symbol
button. The system will reply, "System
will cancel the voice recognition".
•
If you experience difficulty with the system
recognizing a command, try saying it more
softly, and wait for a few seconds after
the beep, or you may just try saying it again.
•
Background noise may cause voice
commands to be misunderstood, including
airflow noise from wind.
•
To use the voice recognition system, the
map DVD must be loaded.
This system is able to recognize commands in
three different languages. The system will only
recognize commands based on the language
selected from the Driver Information Center (DIC).
See "Driver Information Center, DIC Vehicle
Personalization" in the Index of your vehicles
owner manual.

Voice Recognition Commands

The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed
with the optional words in brackets. To use
the voice commands, refer to the instructions
listed previously.
Voice tag Commands
The following are voice tag commands you can
access by clearly stating the commands exactly
as they are written. You may have up to 40 voice
tag entries for destinations.
Navigation go to [destination] (voice tag),
navigation select [destination] (voice tag):
These commands instruct the system to select
a destination saved under the voice tag you
have stored.
If you are not currently driving on a route,
the system will automatically create the voice tag
destination as the final destination. If you are
currently driving on a route, the system will
automatically create the voice tag destination as
a waypoint. Up to three waypoints can be created.
87