Chevrolet 2007 Avalanche Navigation Manual page 37

To use the coordinates destination entry method,
do the following:
1. Press the DEST hard key.
2. Select the Pick from Map screen button.
3. Select the Map Coordinates screen button.
4. Touch N (north) or S (south) next to
Lat. (latitude) to enter the direction of
the latitude coordinate. Enter the numeric
portion of the latitude coordinate.
5. Touch E (east) or W (west) next to Long.
(longitude) to enter the direction of the
longitude coordinate. Enter the numeric
portion of the longitude coordinate.
6. Once both coordinates are entered, select
the OK screen button. The map screen,
with the destination marked, will display.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
See "Getting Started on Your Route" later
in this section for more information.
Preset Destination
The preset destination entry method allows you
to set a destination by selecting from one of
five previously stored destinations. Besides
voice tagged destinations, these are the only
destinations available to set while the vehicle is
moving. If a destination is not set for one of
the screen buttons, the button will be dimmed and
not available for use. See "Adding or Changing
Preset Destinations" later in this section for more
information on how to add a preset destination.
37