Chevrolet 2007 Avalanche Navigation Manual page 41

To add a waypoint:
1. Press the DEST hard key.
2. Select the Add Waypoint screen button.
This button will only appear if a route has
been calculated.
3. Using the desired method of entering
a destination, enter the waypoint. See
"Destination" previously for more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
6. To add the second and third waypoints,
press the DEST hard key, then select the
Add screen button, where you would like
the next waypoint to fall on the route.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
To delete a waypoint from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for the
desired waypoint to delete.
3. The system will display a pop-up confirmation
message. Choose Yes to delete the waypoint;
touch No to cancel this operation.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
Suspend Guidance
Press this screen button, from the Route screen,
to put the current route on hold.
Resume Guidance
Press this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Press this screen button, from the Route screen,
to cancel the current route.
41