Rear Vision Camera - Chevrolet 2007 Avalanche Navigation Manual

Auto (Automatic): Touch this screen button for
the system to automatically adjust the screen
background depending on exterior lighting
conditions.
Night: Touch this screen button and the system
will make the screen background darken.
Day: Touch this screen button and the system
will make the screen background brighten.
Setting the Time
Press the MENU key to enter the menu options,
then press the MENU key repeatedly until the time
is selected or touch the time screen button.
Hours: Press the − (minus) or + (plus) signs to
decrease or increase the hours.
Minutes: Press the − (minus) or + (plus) signs
to decrease or increase the minutes.
12/24 Format: Select the 12 screen button for
standard time; select the 24 screen button
for military time.

Rear Vision Camera

Your vehicle may have a rear vision camera
system. Read this entire section before using
the camera system.
The rear vision camera system is designed to
help the driver when backing up by displaying a
view, on the navigation screen, of the area behind
the vehicle when the driver shifts the vehicle
into REVERSE (R). Once the driver shifts out of
REVERSE (R), the navigation screen will go back
to the last screen that had been displayed; after a
delay, if any portion of the screen is touched, or if
the vehicle speed is greater than 7 mph (11 km/h).
Turning the Rear Vision Camera System
On or Off
To turn the rear vision camera system on or off,
do the following:
1. Shift into PARK (P).
2. Press the MENU hard key to enter the
Menu options, then press the MENU hard
key to select Display or touch the Display
screen button.
51