Firmwre Update - Samsung NX-N2 User Manual

2
Using "PCoIP"

2.4.12 Firmwre Update

Using the Firmwre Update
Configuring the settings
1
Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2
Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3
Log in (Log In) and select Upload
(See the image below.)
4
Select a Firmware to replace the logo and press Upload.
5
Once upload is complete, the Reset button appears. Click the Reset button to reboot the client.
Go to Options
page, change the Teradici Firmware.
Firmware. The
Information, and view the Firmware Version information.
Firmware Upload page appears.
2 Using "PCoIP"
65