Clearing All Mykeys; Checking Mykey System Status; Mykey Distance; Number Of Mykey(S) - Lincoln NAVIGATOR 2015 Owner's Manual

62

CLEARING ALL MYKEYS

You can clear all MyKeys within the same key cycle as you created the
MyKey. If you switch your ignition off, however, you will need to use an
admin key to clear your MyKeys.
Note: When you clear your MyKeys, you remove all restrictions and
return all MyKeys to their original admin key status at once.
To clear all MyKeys of all MyKey settings, use the information display to
do the following:
1. Press SETUP until you see PRESS RESET TO CLEAR MYKEY in
the display.
2. Press and release the RESET button. You will see HOLD RESET
TO CONFIRM CLEAR in the display.
3. Press and hold the RESET button for two seconds until you see
ALL MYKEYS CLEARED in the display.

CHECKING MYKEY SYSTEM STATUS

You can find information about your programmed MyKeys by using the
information display.

MYKEY DISTANCE

Tracks the distance when drivers use a MyKey. The only way to delete
the accumulated distance is by using an admin key to clear your MyKey.
If the distance does not accumulate as expected, then the intended user
is not using the MyKey, or an admin key user recently cleared and then
recreated a MyKey.

NUMBER OF MYKEY(S)

Indicates the number of MyKeys programmed to your vehicle. Use this
feature to detect how many MyKeys you have for your vehicle and
determine when a MyKey has been deleted.
NUMBER OF ADMIN KEY(S)
Indicates how many admin keys are programmed to your vehicle. Use
this feature to determine how many unrestricted keys you have for your
vehicle, and detect if an additional MyKey has been programmed.
MyKey